Cyclone Box Installer v1.10 FBUS2USB, TurboCache, Infineon XGold Imei, Loaders & more

Dieses Thema im Forum "News - Flash & Unlock" wurde erstellt von wolfgang1502, 6. Dezember 2010.

  1. wolfgang1502

    wolfgang1502 Well-Known Member

    Cyclone Box Installer v1.10 FBUS2USB, TurboCache, Infineon XGold Imei, Loaders & more

    proudly presents
    Cyclone Box Installer v1.10
    What's new?

    - Infineon XGold IMEI Backup/Restore added (First in the world)
    - New BB5 FBUS/USB Loaders v10.34.1 introduced
    - BB5 USB Flashing module rewritten, supports new Flashing Type: FUR USB - using FBUS loaders on USB. Is possible now to do also RPL write, Cert's read/write/erase, using just USB cable. Full FBUS protocol emulation over USB supported!
    - FBUS2USB RAPU Support
    - FBUS2USB RAP4 Support
    - FBUS2USB Broadcomm Support
    - Broadcomm platform flashing added (Nokia X2,....)
    - 6700,E52 and other RAPunistore Booting fixed (Wrong First Char Received)
    - SL3 Simlock RPL Write Introduced
    - DCT4/BB5 Flash TurboCache added, increasing flashing speed a bit
    - The Profile Bits is now analyzed before SL3 Unlock (it will not submit job if phone have blocked NCK unlocking - i.e. Telcel Mexico units)
    - New NCK unlocking method for SL2 phones introduced (with latest MCU SW versions)
    - Added Autologging (operation logs are stored in StoredFiles)
    - Added USB Full RPL Backup (NPC,CCC,HWC,Simlock,WMDRM,etc)
    - Added StatusBar in Nokia Tool, displaying current Task/Mobile attached
    - DCC Camera Repair added for module NI00BC0000030102F201
    - DCC Camera Repair added for module ISL3TI0200000C000002
    - DCC Camera Repair added for module IS00TI0200000C208A03
    - DCC Camera Repair added for module IS00TI02000001022B04
    - DCC Camera Repair added for module 86000300010401022B04
    - DCC Camera Repair added for module 8600030001040C208A03
    - DCC Camera Repair added for module 86L10300010406260004
    - DCC Camera Repair added for module 86L10300010406260000
    - DCC Camera Repair added for module 86L103000104094C1003
    - Refactorized GUI thread problems
    - Improved stability of Blackberry calculator
    - Improved flashing speed with Skins Enabled
    - Added detailed Action Statusbar

    We are not finish yet so
    Here we Go again [​IMG]

    - Added CBUS StatusBar, indicates "---->" on USB Transmit, "<----" on USB Receive, Idle and Errors
    - Support area is rebuilt - file list parsing is optimized
    - "Connection Closed Gracefully" in Support Area fixed
    - Connection recovery in SupportArea added
    - Fixed "Floating Point Divison by zero" in Support Area
    - Entered NCK codes are now backed-up too upon Simlock Backup
    - New progressbar introduced in Nokia Tool gui
    - Improved USB SwitchToRaw
    - Improved ADL Server Pooling
    - Improved USB Phone Pooling
    - USB BootRom detect routine rebuilt
    - Fixed "Access Violation" while application exit
    - Fixed Registration Tool bug when "Submit" button is not shown after Box Prepare
    - Fixed bug when software after minimizing to tray don't appears at taskbar
    - Added "KB Left", "Time Left", "Current Speed" real-time information while downloading files from support
    - The Germany Server is now default Support Server
    - Added support for Box HW Revisions B, thus is A11F, B110, B111 and B112, and other B11x
    - Old "INI" File Parser Module added (for Old DCT4 phones)
    - Old "INI" File parser Module added (for Old BB5 phones)
    - Added support for 6630,6680,N70 ini parser (DPConverted v1-v2 VPL files)
    - The product name is now resolved at Product List (i.e. RM-1 (6630))
    - Auto-select flashfiles added (selects product and variants on Read Phone)
    - The new method of BB5 NCK Calculation is now the default Unlock Method for BB5 mobiles. For SL3 use SL3 Online Code Calculation.
    - "Abort" button added, this terminating all threads (during flash, erase, unlock, whatever)
    - Skin Manager updated to v7.02, much stable and faster
    - Fixed box hangup problem when PC goes to sleep mode
    - During SL3 Check/Submit job, phone is readen first, then server transaction starts (to not overload server resources)
    - Failed to Process Initial Challenge (2) during Bootloader Upgrade fixed
    - During SL3 Submit Job software now try first to read PM 120 and detect if phone is SL3
    - Small changes regarding SL3 Submit Job - should work bit smoother right now with bad cables
    - Updated message about SL3 Credit consumption
    - Added bigger delay between entering NCK codes (bruteforce protection)
    - Fixed "Canvas does not allow drawing" while SL3 Manual Mode
    - Cyclone Secure Bootloader v2.13 Released
    - Cyclone Main Firmware v01.49 Released
    - Cyclone Calculator v1.00 added into installer
    - Cyclone USB Drivers Updated to
    - Connectivity Cable drivers updated to
    - Minor changes and bugfixes

    How to update?
    1. Uninstall old installer
    2. Download new installer
    3. Install it
    4. Upgrade box firmware
    5. Enjoy

    Where to download?
    LINK 1
    LINK 2

    Thanks for all who support us! Thx Moulnisky, PTT, Honey, arash, & others...

    Best Regards,
    Cyclone Team